^{G2H PATIOS AND DRIVEWAYS}

Many companies can lay block paving and patio slabs. But if you are to offer a 5 year guarantee then it is only sensible to do the job in the proper manner and within the guidelines of the block manufacturer. At G2H we ALWAYS work in the following manner: -

STEP 1. Dig out the appropriate area to a minimum of 250mm. Lay 150mm of type 1 roadstone and whack it down hard with a whacker packer. Next, make sure that the edges of the driveway are haunched in so as to prevent the blocks from slipping.

STEP 2. Lay 50mm of sharp sand and whack it down hard whilst making sure it is perfectly level. Lay blocks in one of the many patterns available.

STEP 3. Once all blocks are laid, give a final whack down to ensure that all the blocks are firmly in position, then finish by sweeping kiln dried sand into the joints. Your driveway is now ready to accept up to 7.5 ton weight and will not slip or slide when wet.

AS MUCH AS WE HAVE ENJOYED YOUR COMPANY WE DON’T WANT TO HAVE TO VISIT YOU AGAIN - IN THE NICEST POSSIBLE WAY OF COURSE. THAT’S WHY WE’VE TAKEN OUR TIME TO DO THE JOB PROPERLY

PROBABLY THE BEST INSTALLERS IN THE SOUTH

0845 519 3246